AiM MXm Dash
The AiM MXm is a compact dashlogger that supports all the information the driver needs: It records and displays all relevant information such as speed, lap time, engine speed, gears, mathematical channels and much more.
The MXm also has an integrated data logger that records, displays and stores the data via OBD II or from the vehicle CAN bus (AiM can currently communicate with approx. 1000 control units).
The dashlogger has an internal tri-axial acceleration sensor, gyroscope, magnetometer and an integrated 10 Hz GPS. The internal ring buffer has a capacity of 4 GB and can record with a total sampling rate of 5,000 Hz with a 12-bit resolution.
Technical specifications
equipment
| Tachometer | Pick-up from the control unit, terminal 1 of the ignition coil or CAN / RS 232 / OBDII Measuring range 0 to 22,000 rpm Scale end adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22 Sampling rate 10 - 50 Hz, freely selectable freely configurable over-revs control LED |
| Timing | Triggering via GPS Lap times without limit, up to 5 split times Measurement accuracy 1/100 sec. Lap time forecast |
| Analog channels | 4 inputs (0-5 V, 12 bit) Thermocouple 0 - 1200 ° C, measuring accuracy + 0.75% Thermal resistance up to 180 ° C, measuring accuracy + 1 ° 2 RGB alarm LEDs when falling below or exceeding the set alarm values Display in ° C or ° F Sampling rate 1 - 1000 Hz, freely selectable Daily and total odometer |
| speed | 2 digital inputs Acquisition via inductive wheel speed sensor ABS, speed signal transmitter, CAN / RS 232 / OBDII 0 - 438, display in km / h or mph Sampling rate 10 - 100 Hz, freely selectable |
| acceleration | Tri-axial ± 5G, tri-axial gyroscope, tri-axial magnetometer Accelerometer sampling rate 1 - 100 Hz, freely selectable Gyroscope sampling rate 1 - 50 Hz, freely selectable |
| Gear indicator | Calculated from engine speed and speed, recorded via gear sensor or CAN / RS232 / OBDII |
| Sum sampling rate | 5,000 Hz (without ECU) |
| plug | 1x GERMAN 37 pin 1x DTP 06-4S 1x mini USB on the wiring harness |
| Shift light | 5 freely configurable RGB LEDs freely configurable for each gear |
| Additional functions | Display of the difference to the fastest lap in the intermediate times |
| Data storage | 4 GB non-volatile memory |
| Data transfer | WiFi 802.11 or USB |
| Power supply | via 12V electrical system On / off via ignition switch no data loss after switching off |
| Updates | Software and firmware updates free of charge via RaceStudio3 / Internet |
| Dimensions | Case: 137 x 88.4 x 31.9 mm Display: 94.6 x 46.1 mm |
| Weight | 330 gr |
| Protection class | IP65 |
