AiM MyChron5 Basic GPS Dash Logger
The AiM MyChron5 has a high-resolution graphic display to show engine speed, speed, lap times, gear, temperature (one or two with the MC5 2T), satellite reception and the data of the connected extensions such as Lambda or MyChron Expansion. Several display pages can be freely configured and selected using the 4 buttons. The display lighting can be set in 7 different colors and the brightness is controlled by a light sensor.
The speed is recorded via the integrated GPS module, shown on the display and can later be evaluated on the PC with other GPS channels, eg driven line, accelerations ... The screwed-on lithium battery supplies the MyChron5 with power for ten hours and can then be exchanged or charged. It can also be powered by an external 12V battery.
MyChron 5 has two alarm LEDs and 5 switching LEDs that can be configured in seven different colors. The two alarm LEDs can be assigned to any measurement and the switching LEDs can be set sequentially, in full group and gear-selective. The configuration can be transferred, the data downloaded or the measured values checked online via the WiFi connection.
All sensors and cables, as well as MyChron Expansion, Lambda system and SmartyCam from MyChron4 can also be used on the MyChron5.
Specifications
| Tachometer | Inductive pickup from the ignition cable Measuring range 0 to 60,000 rpm |
| Timing | Triggering via magnet, infrared, manual or GPS Lap times without limit, up to 5 split times Measurement accuracy 1/100 sec. |
| Analog channels | About MyChron Expansion |
| temperature | 1 entrance Thermocouple 0 - 999 ° C, measuring accuracy + 0.75% Thermal resistance up to 180 ° C, measuring accuracy + 1 ° 2 alarm LEDs when falling below or exceeding the set alarm values Display in ° C or ° F |
| speed | Acquisition via integrated GPS or MyChron Expansion with sensor |
| Gear indicator | Calculated from engine speed and GPS speed |
| plug | 1x Binder 711-3 | 1x Binder 711-4 | 1x binder 711-5 |
| Shift light | 5 freely configurable RGB LEDs freely selectable for each gear |
| Additional functions | Display of the difference to the fastest lap in the intermediate times |
| Data storage | 4 GB non-volatile memory |
| Data transfer | WiFi 802.11 |
| Power supply | internal lithium battery (10 hours) optional via external 12V battery |
| Updates | Software and firmware updates free of charge via the Internet |
| Dimensions | Housing: 137 x 88 x 47 Display: 94.6 x 46.1 |
| Weight | 340 gr |
