Maptec Nissan CAS Cam Crank Trigger Kit RB26 RB25 VQ30 CA18det
The original Nissan trigger sensors are susceptible and only report the current camshaft position very imprecisely to the engine control unit. This leads to a deviation from the ideal ignition point, which can lead to knocking, misfiring and engine damage. Increasing age and wear and tear make the situation even worse. We have already seen cases in which the camshaft toothing was so blocked that the ignition point varied by 10 ° CA!
A fluctuating ignition point leads to a significant loss of power, can make tuning the engine more difficult or can even cause captial engine damage.
We have therefore developed a cost-efficient and precise trigger kit for vehicles that are equipped with a freely programmable control unit. A 36-1 trigger disk is mounted on the original crankshaft pulley. The Nissan CAS sensor is replaced by the Maptec camshaft sensor. By mounting the camshaft signal transmitter directly on the camshaft, the problem of worn camshaft teeth is completely eliminated.
Note: This product only works in combination with a freely programmable control unit!
variants
Camshaft trigger only
- Only the camshaft trigger kit is supplied as shown.
Camshaft trigger + crankshaft trigger wheel
- Camshaft trigger kit
- 36-1 tooth crankshaft trigger wheel
- KW sensor
The original crankshaft pulley must be assembled by us or by a mechanical engineering company for the assembly of the crankshaft trigger wheel. A bracket for the crankshaft sensor must also be made.
Plug and play variants
We have already installed the above kits on the following engines:
- RB26
- RB25
- VQ30
- CA18
In the future, we will develop complete plug and play trigger kits and add them to this page. You can currently design a crankshaft sensor holder yourself or have one made by us.
If you have any questions about the installation, please feel free to contact us.
