AiM MXS 1.2 Strada Dash
The MXS Strada 1.2 is a large, freely configurable 5 "TFT display without data recording. It has six configurable RGB alarm LEDs, 10 configurable RGB shift lights, USB connection, three CAN connections and communicates with well over 1,000 ECUs from leading ECU manufacturers .
In addition, it has 8 analog inputs, 2 digital inputs, an input for lap times and a digital switching output.
All of this is housed in an IP 65 waterproof aluminum housing with sealed, side-mounted aluminum buttons for quick and easy operation without the need for a PC. Various display pages can be created as desired and displayed on the MXS Strada 1.2.
Technical specifications
equipment
| Tachometer | Pick-up from the control unit, terminal 1 of the ignition coil or CAN / RS 232 / OBDII Measuring range 0 to 22,000 rpm Scale end adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22 Sampling rate 10 - 50 Hz, freely selectable freely configurable over-revs control LED |
| Timing | Triggering via infrared, manual or GPS Lap times without limit, up to 5 split times Measurement accuracy 1/100 sec. Lap time forecast |
| Analog channels | 8 inputs (0-5 V, 12 bit) Thermocouple 0 - 1200 ° C, measuring accuracy + 0.75% Thermal resistance up to 180 ° C, measuring accuracy + 1 ° 6 RGB alarm LEDs when falling below or exceeding the set alarm values Display in ° C or ° F Sampling rate 1 - 1000 Hz, freely selectable Daily and total odometer |
| speed | 1 digital input Acquisition via inductive wheel speed sensor ABS or CAN / RS232 / OBDII 0 - 438, display in km / h or mph Sampling rate 10 - 100 Hz, freely selectable |
| Gear indicator | Calculated from engine speed and speed, recorded via gear sensor or CAN / RS232 / OBDII |
| Sum sampling rate | 5000 Hz (without ECU) |
| plug | 1x AMPSEAL 108-1329 23 pin 1x AMPSEAL 108-1329 14 pin 1x mini USB on the wiring harness |
| Shift light | 10 freely configurable RGB LEDs freely configurable for each gear |
| Additional functions | Display of the difference to the fastest lap in the intermediate times |
| Data transfer | USB |
| Power supply | via 12V electrical system On / off via ignition switch no data loss after switching off |
| Updates | Software and firmware updates free of charge via the Internet |
| Dimensions | Housing: 169.4 x 97 x 23 mm Display: 108.4 x 65.2 mm |
| Weight | 480 gr |
