top of page
Maptec AIM CAN keypad

Maptec AIM CAN keypad

Combine the reliability of an AIM PDM with the simplicity and flexibility of a keypad to round off your installation perfectly. Maptec 8 and 12-way AIM keyboards work specifically with the current AIM PDM 32 and PDM 08 modules. The keyboards are designed for the toughest conditions and operation with gloves. Thanks to the IP67 classification, they can be immersed in water) they are also suitable for open vehicles. The keyboards are easy to program and are connected via CAN bus, which drastically reduces the cabling effort.

Each switch is illuminated with a 7-color LED and can be programmed independently of one another. The input can differentiate between short and long or multiple presses, which opens up countless possibilities. One variation is to use LED lighting to indicate the status of the PDM-assigned device.

Example:
LED green: consumer runs normally

Orange LED: An overcurrent was detected and the "fuse" was automatically reset.

LED red: multiple pad reset of the "fuse">

There are over 700 different inserts available for labeling the keyboard.

The keypad is delivered without key inserts. These must here be ordered separately.

Power supply

12-24Vdc nominal (8-32VDC)

Power consumption:

<50 mA

BUS communication:

RS485, CANopen, J1939

Key diameter:

15 mm

Keyboard:

Silicone rubber with a hard polyurethane coating

Plug / connection:

Deutsch DT04-4P, Molex 19418-0004, Micro-C

Circuits:

min. 3 million

Vibration:

X, Y, Z 10 - 150Hz 0.15mm amp

PCB:

Nema Grade FR-4 / 1.6 mm

Operating temperatur:

-40 ° C to + 85 ° C

Storage temperature:

-40 ° C to + 85 ° C

Humidity:

0 to 98% (no condensation)

UV protection:

UVB 400 hours

Corrosion protection:

according to ASTM B117 standard

Protection class

IP67 / NEMA6

Dimensions

95 x 70 x 21 mm

PriceFrom CHF309.00
VAT Included

Note: Price includes 7.7% Swiss VAT.

(not applicable for delivery outside Switzerland)

Related Products

Useful knowledge

bottom of page